Full Service

  • Engine oil change
  • Air Filter replacement
  • Engine flushing
  • Timing belt assembly replacement
  • Alternator/Power steering/Aircon belting’s replacement
  • Auto transmission flushing
  • Power steering fluid flushing
  • Brake pads replacement
  • Brake line fluid flushing and bleeding
  • Engine mounting replacement
  • Aircon filter replacement
  • Batteries replacement
  • Light bulbs replacement
  • Shock absorber replacement
  • Clutch assembly replacement
  • Driveshaft replacement
  • Coolant replacement
  • Radiator work
  • Starter motor replacement
  • Radiator cap replacement
  • Spark plugs replacement
  • Flushing oil
  • Power booster additives
  • Intake valve cleaner
  • Complete fuel system cleaner
  • Transmission stop leak

Handling & Safety

  • 4-wheel alignment
  • Rotor replacement
  • Coilovers
  • Big brake kit
  • Anti – Roll bar / Anti -Roll bar bushing
  • Brake pads
  • Camber kit / Camber nut
  • Lowering spring
  • Skimming rotor
  • Short shifter
  • Reinforced radiator hose
  • Reinforced engine mount
  • Wheel axle spacer
  • E- throttle
  • Aluminum radiator
  • Stock shock absorber
  • Stock brake kit

Exhaust Specialist

  • Super spiral ventilator
  • Oil catch tank
  • Cold air piping
  • Drop in filter
  • Engine air breather
  • Carbon fiber (CBB series) air intake
  • Air filter cleaner and oil
  • Super inlet big tube
  • Aero form
  • Silicone hose
  • Drop in filter (stainless steel woven)
  • HKS exhaust
  • Remus exhaust
  • Eisenmann exhaust
  • Muffler tip
  • Exhaust manifold
  • Exhaust Pipe
  • Exhaust silencers
  • Exhaust Insulation wrap
  • Exhaust oxygen sensor Adaptors
  • Blow off valve


A motor vehicle service is a series of maintenance procedures carried out at a set time Interval or after the vehicle has travelled a certain distance.

The recommended service interval for most cars is 10,000 km. However if you do not use your car frequently, then you should service your car based on a time interval of 6 months.

Why need servicing?

If servicing is neglected or left idle for long periods oil could be thicken into sludge. which may clog the engine’s lubricating system thus eventually leading to engine failure.  It is important to regularly service your car with quality lubricants based on time or distance, whichever occurs first.

Recommended service also ensure your brake system. driveline and steering components are inspected regularly for correct operation and wear.

If you want a reliable car that never breaks down. then a periodic car servicing in the way to go!


Automotive handling and vehicle handling are descriptions of the way a vehicle responds and reacts to the input of a driver. It is commonly judged by how a vehicle performs during cornering, acceleration and braking as well as the vehicle’s when moving in steady state condition.


Automotive suspension has many variable characteristics which are generally different in the front and rear and all of which affect handling some of these such as: spring rate, damping, straight ahead, camber angle and vehicle heights.


Alignment refers to an adjustment of a vehicle’s suspension. The system that connects a vehicle to its wheels. It is not an adjustment of the wheels or tires themselves. The key to proper alignment is adjusting the angles of the tire which affect how they make contact the road.


A Brake is a mechanical device that inhibits motion by absorbing energy from a moving vehicle that is used for slowing or stopping a moving vehicle.


A muffler will dampen the noise from the engine.
The catalytic converter will turn bad gasses into less harmful gasses.
The silencer and exhaust pipe filter the emissions out and away from the car.
A fully functioning exhaust system will ensure:

  • Your car runs quietly.
  • The harmful gases are converted and disposed off safely.
  • The system contributes to how fuel efficient your car is.
  • It ensures the engine runs soundly.


If your exhaust system is not working correctly, carbon monoxide gas might be drawn into the cabin of the vehicle. If you are expose to this poisonous gas it may cause drowsiness and sometimes more severe health problems. This poses great danger to drivers and passengers alike.


If your function of the air intake system is to allow air to reach your car’ s engine. The air is one of the necessary ingredients of the engine combustion process. only then will the air be sent to the intake manifold that supplies the fuel / air mixture to the engine cylinders

Cold air intakes us oem air intakes

The first benefits for replacing stock air intake system is increased acceleration due to added horsepower and torque. secondly with more air in combustion mixture. the engine uses lesser fuel to power itself. Next, aftermarket air intake has more effective filters then the ones that comes with OEM air intakes.


LTA Compliant
Sporty design & sonorous sound
Various tailpipe versions
Exhaust flap technology
Sports catalyst
Manufactory production of stainless steel
Made in Germany


Maximum air flow for a livelier throttle response.
Advanced polyurethane filter construction for extra lightweight and durability.
Strong galvanised steel mesh coated with bright Epoxy adds long lasting beauty and protection.
Unique 3D Precision Weaving Technology for constant superior filtration.
Deeper pleats for more filtration surface.
Temperature range from -30°C to 150°C (-22°F`302°F)
Cleanable and reusable


Forged Monoblock Aluminum caliper.
Titanium Anti-rattle clips.
Heat pressing Carbon Logo.
It is available for 4 POT 6 POT 8 POT caliper with dust cover
We provide street, sport and race brake pad in order to meet different demands.
Discs come with two-piece design and center bell is made of aluminum to lower unsprung weight. The design of arc vents provide a better function of heat dissipation and lower the discs temperature in a short moment.
All the metal parts are applied with high standard anticorrosive finish work.


36-way damping setting is able to adjust the damping settings freely to meet the requirement of street setup and enjoy the hedonics of speed.
There are rubber top mount and pillowball rubber top mount of street McPherson coilover for your options, it also keeps the original comfort setup for 60%.
The ride height adjustable function is able to prevent the spring perch to compress the spring and avoid the unusual sound. Besides, this function avoids the situation that you raise or lower the ride height too much and cause the spring perch does not snug the spring, which will damage the coilover. Our coilover can be adjusted ±30mm from OE ride height.